Communication module – DEYE – SUN-SMART-TX01
| Manufacturer | |
|---|---|
| Weight | 0,1 kg |
| CN | 85049090 |
Gross
Product details
| Manufacturer | |
|---|---|
| Weight | 0,1 kg |
| CN | 85049090 |
Deye LoRa Wireless Energy Management System
The Deye LoRa wireless energy management system is an advanced solution for smart load management and home automation, built on reliable LoRa communication. The system integrates Deye hybrid inverters with devices such as smart plugs, switches, EV chargers and wireless current transformers (CTs), offering ultra-low latency and the ability to operate offline. This lets you maximize solar energy use and minimize electricity bills through flexible control strategies.
Key features of the Deye LoRa Wireless Energy Management System:
- Low communication latency: Using LoRa technology provides a response time of around 0.2 seconds, ensuring an immediate and stable system response.
- Offline operation: IoT devices communicate locally via the LoRa protocol, allowing commands to be executed even without Internet access.
- Versatile system components: The series includes wireless current transformers (CTs), Smart TX transmitters, smart plugs, switches and EV chargers.
- Intelligent load control: Easily define critical and non-critical loads and adjust on/off logic based on time and the battery’s state of charge (SOC).
- Flexible EV charger: Supports output power from 7–22 kW depending on the model, and operating modes such as Plug-and-Play, scheduled charging or solar-only charging.
Who is this a good choice for?
The system is designed for owners of Deye hybrid inverters who are looking for an advanced, reliable and fast home automation and energy management solution. It works well in both residential and commercial settings where efficient use of photovoltaic surplus, optimization of electricity costs and independence from Internet stability are key.
| Parameter | SUN-SMART-CT01 | SUN-SMART-TX01 | SUN-SMART-SWITCH01P3 | SUN-SMART-PLUG01-F | SUN-EVSE11K01-EU-AC | SUN-EVSE22K01-EU-AC |
|---|---|---|---|---|---|---|
| Electrical parameters | ||||||
| Operating / input voltage (V) | 85–300 V AC (L-N) | DC 5 V | 94–238 V AC (phase voltage) | 220–250 V AC | 230 / 400 V AC | 230 V AC (single-phase), 230 / 400 V AC (three-phase) |
| Connection type | L1/N (single-phase), L1/L2/L3/N (three-phase) | — | L1/N (single-phase), L1/L2/L3/N (three-phase) | Plug-in (Schuko type F) | 3L+N+PE | L+N+PE, 3L+N+PE |
| Maximum / input current (A) | Secondary current: 50 mA | — | 25 A AC (phase current) | 16 A AC | 16 | 32 |
| Rated frequency / range (Hz) | 50 (45–55) / 60 (55–65) | — | 50 (45–55) / 60 (55–65) | 50 (45–55) / 60 (55–65) | 50 (45–55) / 60 (55–65) | 50 (45–55) / 60 (55–65) |
| Power consumption (W) | <2 | — | — | — | — | — |
| Maximum output power (kW) | — | — | — | — | 11 | 7 (single-phase) / 22 (three-phase) |
| AC withstand voltage | 4 kV / 1 min | — | — | — | — | — |
| Measurement accuracy | Voltage: ±0.1 V, Current: ±0.01 A, Frequency: ±0.01 Hz, Power: ±1 W | — | — | — | — | — |
| Communication and control | ||||||
| Communication interface | LoRa, RS485 | LoRa | LoRa | LoRa | LoRa, Wi‑Fi, BLE | LoRa, Wi‑Fi, BLE |
| LoRa communication range (m) | ≤200 (no obstacles) | ≤200 (no obstacles) | ≤200 (no obstacles) | ≤200 (no obstacles) | — | — |
| Display | LCD (voltage, current, active/reactive power, frequency, power factor, energy) | — | — | — | — | — |
| Startup method | — | — | — | — | Plug & Play, Card scanning, Reservation | Plug & Play, Card scanning, Reservation |
| LoRa radio parameters | ||||||
| Frequency range (MHz) | — | 863–870 | 863–870 | 863–870 | — | — |
| Antenna | — | Built-in | Internal | Internal | — | — |
| Antenna gain (dBi) | — | 0.56 | 1.58 @ 868 MHz | 0.3–2.3 @ 868 MHz | — | — |
| Protections | ||||||
| System protections | — | — | — | — | Protection against overheating, low temperature, overvoltage, undervoltage, short circuit, overload, earth fault | Protection against overheating, low temperature, overvoltage, undervoltage, short circuit, overload, earth fault |
| Leakage current protection | — | — | — | — | DC 6 mA | DC 6 mA |
| Surge protection level | — | — | — | — | Type II | Type II |
| General and mechanical data | ||||||
| Operating temperature (°C) | -40 to +60 | -40 to +60 | -40 to +45 | -40 to +60 | -40 to +55 | -40 to +55 |
| Permissible humidity | 0–75% | 0–100% | 0–100% RH | — | 5%–95% (non‑condensing) | 5%–95% (non‑condensing) |
| Ingress protection (IP) | IP20 | IP20 (IP65 after installation) | IP65 | IP20 | IP66 | IP66 |
| Protection class | — | — | Class I | Class I | — | — |
| Maximum altitude above sea level (m) | ≤4000 | ≤4000 | ≤4000 | ≤3000 | ≤3000 | ≤3000 |
| Noise level (dB) | — | — | — | — | <25 | <25 |
| Mounting | DIN rail | Inverter meter port | Plug connector | Mains socket | Wall‑mounted / pole‑mounted | Wall‑mounted / pole‑mounted |
| Charging cable length (m) | — | — | — | — | 4.2 | 4.2 |
| Number of charging connectors | — | — | — | — | 1 (cable with gun) | 1 (cable with gun) |
| Dimensions (W × H × D) (mm) | 53 × 96 × 64 | 137.8 × 31.3 × 31.3 | 96.7 × 204.7 × 37.7 | 51.2 × 51.2 × 64 | 104 × 264 × 57.5 | 104 × 264 × 57.5 |
| Weight | 0.15 kg | 45.8 g | 0.4 kg | 0.08 kg | 3.7 kg | 4.2 kg |
| Reliability (MTBF) (h) | — | — | — | — | 100,000 | 100,000 |
| Warranty | 5 years | 2 years | 5 years | 5 years | — | — |
| Certificates and standards | IEC/EN 61010-1 | IEC/EN 62368-1 | IEC/EN 61010-1 | VDE 0620-2-1, EN 61058 | EN IEC 61851-1, IEC 61851-1, EN 300 220-2, EN 300 328, EN IEC 62311, EN 301 489-1/3/17, EN IEC 61000-6-1/3, EN IEC 61851-21-2 | EN IEC 61851-1, IEC 61851-1, EN 300 220-2, EN 300 328, EN IEC 62311, EN 301 489-1/3/17, EN IEC 61000-6-1/3, EN IEC 61851-21-2 |
* LoRa radio communication range up to 200 m applies to open space free of obstacles. Actual range depends on building architecture and construction materials.

